2 - 5 Tons

13.0 SEER / 11.3 to 11.7 EER

Compressor - 5 Yr 1ph / 5Yr 3ph

Other parts - 5 Yr 1ph / 1 Yr 3ph

York Latitude Series packaged A/C units are designed for outdoor installation that saves indoor living space. Designed to deliver maximum cooling while using minimum amounts of energy. The compact design allows easy installation and reduces shipping damage. Complete with 4 way forkable, full perimeter base rails, these units provide easy access for a forktruck while providing a raised base to prevent moisture build up.

• Three footprints to optimize performance and keep these units compact and easy to install.
• Constructed of pre-painted galvanized steel to protect against corrosion and resists fading.
• Internally protected compressor to protect against high pressure and high temperature.
• Factory installed liquid line filter drier to keep the refrigerant system moisture free.
• Large condensing coil surface for extremely efficient heat transfer to reduce the load on the compressor.
• Complete line of field installed accessories including electric resistance strip heaters, hard start kits, thermostats, and more.

2 - 5 Tons

13.0 SEER / 11.3 to 11.7 EER

Compressor - 5 Yr 1ph / 5Yr 3ph

Other parts - 5 Yr 1ph / 1 Yr 3ph

York Latitude R-410A Series packaged A/C units are designed for outdoor installation that saves indoor living space. Designed to deliver maximum cooling by using minimum amounts of energy by utilizing Microchannel condenser coil technology. The compact design allows easy installation and reduces shipping damage. Complete with 4 way forkable, full perimeter base rails, these units provide easy access for a forktruck while providing a raised base to prevent moisture build up.

• Two footprints to optimize performance and keep these units compact and easy to install.
• Constructed of powder coated, painted galvanized steel to protect against corrosion and resists fading.
• Internally protected compressor to protect against high pressure and high temperature.
• Factory installed liquid line filter drier to keep the refrigerant system moisture free.
• Microchannel condensing coil surface for extremely efficient heat transfer to reduce the load on the compressor.
• Complete line of field installed accessories including electric resistance strip heaters, hard start kits, thermostats, and more.

2 - 5 Tons

14.0 SEER / 12.0 EER / 80% AFUE

Compressor - 10-Year Limited

Heat Exchanger - 20 years

Other parts - 10-Year Limited

YORK’s Affinity package units are designed to handle applications ranging from residential to light commercial and any in between. The Affinty is a unit that gives you the flexibility and choices you need in today’s market.

• R-410A Refrigerant
• Cooling/Gas Heating Units (Natural Gas or Propane)
• Low Profile
• Quiet Operation
• Common Footprint
• Optional Slide in Motorized Dampers
• Optional Slide in Economizers
• Optional Propane Conversion Kit
• Optional High Altitude Conversion Kit (Natural Gas/Propane)
• Optional Low NOx Kit
• Full Permeter Base Rails
• Bottom and Side Utility Connections
• 1" or 2" Cleanable Filters Standard on all 3 Models. Optional on 1 Models.

2 - 4 Tons

15.0 to 16.5 SEER / 11.2 to 12.3 EER / 80% AFUE

Compressor - 10-Year Limited

Heat Exchanger - 20 years

Other parts - 10-Year Limited

YORK’s Affinity package units are designed to handle applications ranging from residential to light commercial and any in between. The Affinty is a unit that gives you the flexibility and choices you need in today’s market.

• R-410A Refrigerant
• Cooling/Gas Heating Units (Natural Gas or Propane)
• Low Profile
• Quiet Operation
• Common Footprint
• Optional Slide in Motorized Dampers
• Optional Slide in Economizers
• Optional Propane Conversion Kit
• Optional High Altitude Conversion Kit (Natural Gas/Propane)
• Optional Low NOx Kit
• Full Permeter Base Rails
• Bottom and Side Utility Connections
• 1" or 2" Cleanable Filters Standard on all 3 Models. Optional on 1 Models.

2 - 5 Tons

13.7 to 14.0 SEER / 10.6 to 11.1 EER / 80% AFUE

Compressor - 10-Year Limited

Heat Exchanger - 20 years

Other parts - 10-Year Limited

YORK’s Affinity package units are designed to handle applications ranging from residential to light commercial and any in between. The Affinty is a unit that gives you the flexibility and choices you need in today’s market.

• R-410A Refrigerant
• Cooling/Gas Heating Units (Natural Gas or Propane)
• Low Profile
• Quiet Operation
• Common Footprint
• Optional Slide in Motorized Dampers
• Optional Slide in Economizers
• Optional Propane Conversion Kit
• Optional High Altitude Conversion Kit (Natural Gas/Propane)
• Optional Low NOx Kit
• Full Permeter Base Rails
• Bottom and Side Utility Connections
• 1" or 2" Cleanable Filters Standard on all 3 Models. Optional on 1 Models.

2 - 5 Tons

13.0 to 13.5 SEER / 11.1 to 11.8 EER / 80% AFUE

Compressor - 10-Year Limited

Heat Exchanger - 20 years

Other parts - 10-Year Limited

YORK’s Affinity package units are designed to handle applications ranging from residential to light commercial and any in between. The Affinity is a unit that gives you the flexibility and choices you need in today’s market.

• R-410A Refrigerant
• Cooling/Gas Heating Units (Natural Gas or Propane)
• Low Profile
• Quiet Operation
• Common Footprint
• Optional Slide in Motorized Dampers
• Optional Slide in Economizers
• Optional Propane Conversion Kit
• Optional High Altitude Conversion Kit (Natural Gas/Propane)
• Optional Low NOx Kit
• Full Permeter Base Rails
• Bottom and Side Utility Connections
• 1" or 2" Cleanable Filters Standard on all 3 Models. Optional on 1 Models.

2 - 5 Tons

13.0 to 13.7 SEER / 11.0 to 11.8 EER / 80% AFUE

Compressor - 10yr 1ph / 5yr 3ph

Heat Exchanger - 20 yr

Other parts - 5yr 1ph / 1yr 3ph

YORK's Affinity package units are designed to handle applications ranging from residential to light commercial and any in between. The Affinity is a unit that gives you the flexibility and choices you need in today's market with 13+ SEER along with a factory mounted TXV.

• Cooling / Gas heating units (Natural Gas or Propane)
• Low profile
• Quiet operation
• Optional field installed economizers
• Optional field installed motorized dampers
• Optional propane conversion kit
• Optional High Altitude gas or propane kit
• Optional NOx kits
• Modular electrical connections for ease of installation
• Full perimeter base rails
• Trouble free utility connections

2 - 5 Tons

14.0 SEER/ 12.0 EER

Compressor - 10-Year Limited

Other parts - 10-Year Limited

York Affinity Series packaged cooling units are designed for outdoor installation that saves indoor living space. Nominal airflow of 1,200 to 1,600 CFM is provided by a high efficiency, constant airflow, direct-drive motors To make installation and maintenance easier, they offer field-convertible side or bottom airflow, removable base rails, and bottom electrical connections. All models have the same footprint, so curbs can be placed and the proper tonnage unit can be installed after the internal load has been determined. The compact dimensions allow any model to fit between the wheel wells of a full-size pickup truck for transport. Affinity units are offered in 208/230 1-phase and 3-phase configurations with 208/230, 460, and 575 voltages.

• All model sizes share a common, compact design cabinet in a single footprint for on-site flexibility.
• Installation time and costs are reduced by easy power and control wiring.
• All units are factory wired, charged with R-410A, and tested prior to shipment.
• Electric utility knockouts are provided on unit side and bottom for easy connections.
• Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
• Condensate pan is non-corrosive, long-lasting, and watertight.
• Condensate drain is heavy-duty.
• One-inch NPT copper connection is rigidly mounted for a proper fit and a tight seal.
• Durable finish, made of powder-painted, galvanized steel to meet 1000-hour salt-spray test demands.
• Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
• Engineered and built to be among the quietest.
• Compressor is internally protected against high pressure and temperature.
• Grooved copper tubes and enhanced aluminum-fin construction improve heat transfer.
• Secured service access ports are protected, externally mounted, and reusable on both high and low lines.
• Complete line of field-installed accessories, including economizers, single- and dual-enthalpy sensors, and more.

2 - 4 Tons

15.0 SEER / 12.3 EER

Compressor - 10-Year Limited

Other parts - 10-Year Limited

York Affinity Series packaged cooling units are designed for outdoor installation that saves indoor living space. Nominal airflow of 1,200 to 1,600 CFM is provided by a high efficiency, constant airflow, direct-drive motors To make installation and maintenance easier, they offer field-convertible side or bottom airflow, removable base rails, and bottom electrical connections. All models have the same footprint, so curbs can be placed and the proper tonnage unit can be installed after the internal load has been determined. The compact dimensions allow any model to fit between the wheel wells of a full-size pickup truck for transport. Affinity units are offered in 208/230 1-phase and 3-phase configurations with 208/230, 460, and 575 voltages.

• All model sizes share a common, compact design cabinet in a single footprint for on-site flexibility.
• Installation time and costs are reduced by easy power and control wiring.
• All units are factory wired, charged with R-410A, and tested prior to shipment.
• Electric utility knockouts are provided on unit side and bottom for easy connections.
• Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
• Condensate pan is non-corrosive, long-lasting, and watertight.
• Condensate drain is heavy-duty.
• One-inch NPT copper connection is rigidly mounted for a proper fit and a tight seal.
• Durable finish, made of powder-painted, galvanized steel to meet 1000-hour salt-spray test demands.
• Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
• Engineered and built to be among the quietest.
• Compressor is internally protected against high pressure and temperature.
• Grooved copper tubes and enhanced aluminum-fin construction improve heat transfer.
• Secured service access ports are protected, externally mounted, and reusable on both high and low lines.
• Complete line of field-installed accessories, including economizers, single- and dual-enthalpy sensors, and more.

5 Tons

14.5 SEER / 11.6 EER

Compressor - 10-Year Limited

Other parts - 10-Year Limited

York Affinity Series packaged cooling units are designed for outdoor installation that saves indoor living space. Nominal airflow of 1,200 to 1,600 CFM is provided by a high efficiency, constant airflow, direct-drive motors To make installation and maintenance easier, they offer field-convertible side or bottom airflow, removable base rails, and bottom electrical connections. All models have the same footprint, so curbs can be placed and the proper tonnage unit can be installed after the internal load has been determined. The compact dimensions allow any model to fit between the wheel wells of a full-size pickup truck for transport. Affinity units are offered in 208/230 1-phase and 3-phase configurations with 208/230, 460, and 575 voltages.

• All model sizes share a common, compact design cabinet in a single footprint for on-site flexibility.
• Installation time and costs are reduced by easy power and control wiring.
• All units are factory wired, charged with R-410A, and tested prior to shipment.
• Electric utility knockouts are provided on unit side and bottom for easy connections.
• Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
• Condensate pan is non-corrosive, long-lasting, and watertight.
• Condensate drain is heavy-duty.
• One-inch NPT copper connection is rigidly mounted for a proper fit and a tight seal.
• Durable finish, made of powder-painted, galvanized steel to meet 1000-hour salt-spray test demands.
• Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
• Engineered and built to be among the quietest.
• Compressor is internally protected against high pressure and temperature.
• Grooved copper tubes and enhanced aluminum-fin construction improve heat transfer.
• Secured service access ports are protected, externally mounted, and reusable on both high and low lines.
• Complete line of field-installed accessories, including economizers, single- and dual-enthalpy sensors, and more.

2 - 5 Tons

13.0 SEER / 11.8 EER

Compressor - 10-Year Limited

Other parts - 10-Year Limited

York Affinity Series packaged cooling units are designed for outdoor installation that saves indoor living space. Nominal airflow of 1,200 to 1,600 CFM is provided by a high efficiency, constant airflow, direct-drive motors To make installation and maintenance easier, they offer field-convertible side or bottom airflow, removable base rails, and bottom electrical connections. All models have the same footprint, so curbs can be placed and the proper tonnage unit can be installed after the internal load has been determined. The compact dimensions allow any model to fit between the wheel wells of a full-size pickup truck for transport. Affinity units are offered in 208/230 1-phase and 3-phase configurations with 208/230, 460, and 575 voltages.

• All model sizes share a common, compact design cabinet in a single footprint for on-site flexibility.
• Installation time and costs are reduced by easy power and control wiring.
• All units are factory wired, charged with R-410A, and tested prior to shipment.
• Electric utility knockouts are provided on unit side and bottom for easy connections.
• Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
• Condensate pan is non-corrosive, long-lasting, and watertight.
• Condensate drain is heavy-duty.
• One-inch NPT copper connection is rigidly mounted for a proper fit and a tight seal.
• Durable finish, made of powder-painted, galvanized steel to meet 1000-hour salt-spray test demands.
• Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
• Engineered and built to be among the quietest.
• Compressor is internally protected against high pressure and temperature.
• Grooved copper tubes and enhanced aluminum-fin construction improve heat transfer.
• Secured service access ports are protected, externally mounted, and reusable on both high and low lines.
• Complete line of field-installed accessories, including economizers, single- and dual-enthalpy sensors, and more.

2 - 5 Tons

13.0 SEER / 11.1 to 11.5 EER

Compressor - 1Ph-10Yr / 3Ph-5Yr

Other parts - 1Ph-5Yr / 3Ph-1Yr

York Affinity Series packaged cooling units are designed for outdoor installation that saves indoor living space. Nominal airflow of 1,200 to 2,000 CFM is provided by constant volume ECM, direct-drive motors. To make installation and maintenance easier, they offer field-convertible side or bottom airflow, removable base rails, and bottom electrical connections. All models have the same footprint, so curbs can be placed and the proper tonnage unit can be installed after the internal load has been determined. The compact dimensions allow any model to fit between the wheel wells of a full-size pickup truck for transport. Affinity units are also offered in 3-phase configurations with 208/230, 460, and 575 voltages.

• All model sizes share a common, compact design cabinet in a single footprint for on-site flexibility.
• Installation time and costs are reduced by easy power and control wiring.
• All units are factory wired, charged with R-22, and tested prior to shipment.
• Electric utility knockouts are provided on unit side and bottom for easy connections.
• Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
• Condensate pan is non-corrosive, long-lasting, and watertight.
• Condensate drain is heavy-duty.
• One-inch NPT1 copper connection is rigidly mounted for a proper fit and a tight seal.
• Durable finish, made of powder-painted, galvanized steel to meet 1000-hour salt-spray test demands.
• Full-perimeter base rails are easily removable, yet provide a solid unit foundation.
• Engineered and built to be among the quietest.
• Compressor is internally protected against high pressure and temperature.
• Grooved copper tubes and enhanced aluminum-fin construction improve heat transfer.
• Secured service access ports are protected, externally mounted, and reusable on both high and low lines.
• Complete line of field-installed accessories, including economizers, single- and dual-enthalpy sensors, and more.

Infinity™ 15 Packaged Air Conditioner and Gas Furnace System with Puron® Refrigerant R-410A)
Capacity 2 - 5 Nominal tons
Efficiency (EER/SEER) 12.0 - 15.5

• System compatible with Infinity™ Controls only
• Stainless steel heat exchanger
• Puron® refrigerant, an environmentally-friendly alternative
• Up to 15 SEER, up to 12 EER at 95¡F OD and AFUE of up to 80.1%
• Built-in Thermostatic Expansion Valve (TXV) improves overall efficiency
• Variable-speed, direct-drive Indoor Blower is standard on all models
• Envirotuff™ rust-proof base with integrated drain
• Easily converts to down discharge applications with duct covers provided
• Listed by UL and UL-Canada
• Induced-draft combustion and venting
• Vertical condenser fan discharge
• Automatic electric pilot ignition
• Sound ratings as low as 72 dB
• Copper tube/aluminum fin Condenser and Evaporator Coils
• Louvered Grille, Pressure Switches and Filter Drier
• NOx-approved units
• Two-stage Scroll Compressor
• Two-stage gas heat
• Approved for low-ambient operation down to 0¡F (low-ambient cooling must be enabled in the UI setup)

Infinity™ 15 Packaged Air Conditioner and Gas Furnace System with Puron® Refrigerant R-410A)
Capacity 2 - 5 Nominal tons
Efficiency (EER/SEER) 12.0 - 15.5

• System compatible with Infinity™ Controls only
• Stainless steel heat exchanger
• Puron® refrigerant, an environmentally-friendly alternative
• Up to 15 SEER, up to 12 EER at 95¡F OD and AFUE of up to 80.1%
• Built-in Thermostatic Expansion Valve (TXV) improves overall efficiency
• Variable-speed, direct-drive Indoor Blower is standard on all models
• Envirotuff™ rust-proof base with integrated drain
• Easily converts to down discharge applications with duct covers provided
• Listed by UL and UL-Canada
• Induced-draft combustion and venting
• Vertical condenser fan discharge
• Automatic electric pilot ignition
• Sound ratings as low as 72 dB
• Crankcase heater standard on all models
• Copper tube/aluminum fin Condenser and Evaporator Coils
• Louvered Grille, Pressure Switches and Filter Drier
• NOx-approved units
• Two-stage Scroll Compressor
• Two-stage gas heat
• Approved for low-ambient operation down to 0¡F (low-ambient cooling must be enabled in the UI setup)

Single-Packaged Air Conditioner and Gas Furnace System with Puron® Refrigerant (R-410A)
Single and Three Phase
14 SEER
2 to 5 Nominal Tons
Sizes 018-060

• Puron® refrigerant, the environmentally friendly alternative
• 14.0 to 14.3 SEER, 12.0 EER AT 95¼ F OD
• AFUE of up to 80.4%
• Built-in Thermostatic Expansion Valve (TXV) improves overall efficiency
• Multi-speed, direct drive indoor blower is standard on all models
• Envirotuff™ rust-proof base with integrated drain
• Easily converts to down discharge with duct covers provided
• Induced-draft combustion and venting
• Vertical condenser fan discharge
• Automatic electric pilot ignition
• Sound ratings as low as 71dBA
• Copper tube/aluminum fin condenser and evaporator coils
• UL and UL Canada certified
• Wire grille, pressure switches, and filter drier
• NOx approved units (48VLN)

Single-Packaged Air Conditioner and Gas Furnace System with Puron® Refrigerant (R-410A)
14 SEER
Single and Three Phase
2 to 5 Nominal Tons
Sizes 018-060

• Puron® refrigerant, the environmentally sound refrigerant
• 14.2 to 14.5 SEER, 12.0 EER AT 95¼ F OD
• AFUE of up to 80.4%
• Three panel access for ease of installation and serviceability
• Built-in Thermostatic Expansion Valve (TXV) improves overall efficiency
• Multi-speed, direct drive indoor blower is standard on all models
• Envirotuff™ rust-proof base with integrated drain
• Easily converts to down discharge
• Induced-draft combustion and venting
• Vertical condenser fan discharge
• Automatic electric pilot ignition
• Sound ratings as low as 73dBA
• Copper tube/aluminum fin condenser and evaporator coils
• UL and UL Canada certified and all sizes Energy Star® approved
• Louvered grille, pressure switches, and filter drier
• NOx approved units (48VLNA)
• Dehumidification standard when used with Thermidistat Control

Comfort 13
Packaged Gas Furnace/Air Conditioner System
Sizes 018 Thru 060
Single and three Phase

• Puron® refrigerant, the environmentally friendly alternative
• 13.0 SEER, 11 EER AT 95¼ F OD
• AFUE of up to 81%
• Built-in Thermostatic Expansion Valve (TXV) improves overall efficiency
• Multi-speed, direct drive indoor blower is standard on all models
• Envirotuff™ rust-proof base with integrated drain
• Easily converts to down discharge with duct covers provided
• Induced-draft combustion and venting
• Vertical condenser fan discharge
• Automatic electric pilot ignition
• Sound ratings as low as 72dB
• Copper tube/aluminum fin condenser and evaporator coils
• UL and UL Canada certified
• Wire grille, pressure switches, and filter drier
• NOx approved units (48ESN)

Comfort 13
Packaged Gas Furnace/Air Conditioner System
Sizes 018 Thru 060
Single and three Phase

• Puron® refrigerant, the environmentally sound refrigerant
• 13.0 SEER, 11 EER AT 95¼ F OD
• AFUE of up to 80,4%
• Three panel access for ease of installation and serviceability
• Built-in Thermostatic Expansion Valve (TXV) improves overall efficiency
• Multi-speed, direct drive indoor blower is standard on all models
• Envirotuff™ rust-proof base with integrated drain
• Easily converts to down discharge
• Induced-draft combustion and venting
• Vertical condenser fan discharge
• Automatic electric pilot ignition
• Sound ratings as low as 75dBA
• Copper tube/aluminum fin condenser and evaporator coils
• UL and UL Canada certified
• Wire grille, pressure switches, and filter drier
• NOx approved units (48ESN)
• Dehumidification standard when used with Thermidistat Control

Single-Package Rooftop
Ultra-High Efficiency
Gas Heating/Electric Cooling Units
2 to 12.5 Nominal Tons

48PG units are single-package ultra high efficient electric cooling with gas heating rooftop units. These units provide industry-leading operating efficiencies, ease of maintenance, installability, and reliability. Units come pre-wired and pre-charged with Puron® (R-410A) environmentally sound refrigerant at the factory. Units are factory tested in both heating and cooling modes.

• Puron® (R-410A) refrigerant
• SEERs up to 14.8, EERs up to 12.5
• IEER up to 13.5
• Low sound levels as low as 72 dB
• Single-stage capacity control on 03 - 07 models
• Multi-stage capacity control on 08 - 28 models
• TXV refrigerant metering system on each circuit
• Cooling operation up to 125¡ F ambient
• Foil faced insulation encapsulated throughout entire unit minimizes airborne fibers from the airstream
• Dedicated compressor compartment for lower sound ratings and no air bypass
• Internally sloped condensate pan conforms to ASHRAE 62 standard (03-16 sizes include slide-slideout
• High performance belt drive motor with variable pitch pulleys and quick adjust belt system
• 2-inch filter standard with 4-inch capabilities
• ComfortLink™ controls provide:
  • Cooling operation down to 0¡ F (-17¡ C) ambient
  • Compressor reverse rotation protection
  • Large visual display Ð scrolling marquee
  • 3V™ and CCN integration capabilities
• Gas efficiencies up to 82%
• Dedicated 2-5 ton Low NOx models available that meet California Air Quality Management NOx requirement of 40 nanograms/joule or less. Low NOx models include stainless steel heat exchangers
• Optional Humidi-MiZerª on-demand adaptive dehumidification system
• Tested in accordance with ARI Standards 210-94 (sizes 03-12) and 360-95 (sizes 14-28)
• Tested in accordance with UL Standard 1995 and listed with UL and UL, Canada

Single-Package Rooftop
High Efficiency
Gas Heating/Electric Cooling Units
3 to 25 Nominal Tons

48TC WEATHERMAKER® rooftop unit were designed by customers for customers. With a gauge plug, centralized control center, plug & play accessory board, Òno-strip screwÓ collars, and handled access panels, weÕve made the unit easy to install, easy to maintain, and easy to use. Units are pre-wired and pre-charged with environmentally sound Puron® (R-410A) refrigerant at the factory. The units are factory tested in both heating and cooling modes.

• Puron® (R-410A) HFC refrigerant
• ASHRAE compliant and Energy Star qualified
• Single-stage capacity control (sizes 04 to 12)
• Two-stage cooling capacity control (sizes 08 to 028) with Novation™ Heat Exchanger Technlogy condenser coils
• SEERs up to 13.0
• EERs up to 11.1
• IPLVs up to 12.2
• Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
• Gas efficiencies up to 82%
• Induced draft combustion
• Single and multi-state heating
• Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
• Acutrol™ refrigerant metering system
• Fully insulated cabinet
• Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
• Dedicated 3-5 ton ÒLow NOxÓ models available that meet California Air Quality Management NOx requirement of 40 nangram/joule or ess. Low NOx models include stainless steel heat exchangers.
• Cooling operating range up to 115 ¡F (46¡C) and down to 25¡F (-4¡C) using winter start kit
• Rated in accordance with ARI Standards 210 (sizes 04 to 06 ) and 360 (sizes 07 to 28)
• Designed in accordance with UnderwritersÕ Laboratories Standard 1995
• Listed by UL and UL, Canada

Single-Package Rooftop
High Efficiency
Gas Heating/Electric Cooling Units
3 to 25 Nominal Tons

48TC WEATHERMAKER® rooftop unit were designed by customers for customers. With a gauge plug, centralized control center, plug & play accessory board, Òno-strip screwÓ collars, and handled access panels, weÕve made the unit easy to install, easy to maintain, and easy to use. Units are pre-wired and pre-charged with environmentally sound Puron® (R-410A) refrigerant at the factory. The units are factory tested in both heating and cooling modes.

• Puron® (R-410A) HFC refrigerant
• ASHRAE compliant and Energy Star qualified
• Single-stage capacity control (sizes 04 to 12)
• Two-stage cooling capacity control (sizes 08 to 028) with Novation™ Heat Exchanger Technlogy condenser coils
• SEERs up to 13.0
• EERs up to 11.1
• IPLVs up to 12.2
• Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
• Gas efficiencies up to 82%
• Induced draft combustion
• Single and multi-state heating
• Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
• Acutrol™ refrigerant metering system
• Fully insulated cabinet
• Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
• Dedicated 3-5 ton ÒLow NOxÓ models available that meet California Air Quality Management NOx requirement of 40 nangram/joule or ess. Low NOx models include stainless steel heat exchangers.
• Cooling operating range up to 115 ¡F (46¡C) and down to 25¡F (-4¡C) using winter start kit
• Rated in accordance with ARI Standards 210 (sizes 04 to 06 ) and 360 (sizes 07 to 28)
• Designed in accordance with UnderwritersÕ Laboratories Standard 1995
• Listed by UL and UL, Canada

Single-Package Rooftop
High Efficiency
Gas Heating/Electric Cooling Units
3 to 10 Nominal Tons

48HC WEATHERMASTER™ rooftop unit were designed by customers for customers. With a gauge plug, centralized control center, plug & play accessory board, "no-strip screw" collars, and handled access panels, weÕve made the unit easy to install, easy to maintain, and easy to use. Units are pre-wired and pre-charged with environmentally sound Puron™ (R-410A) refrigerant at the factory. The units are factory tested in both heating and cooling modes.

• Puron™ (R-410A) HFC refrigerant
• ASHRAE 90.1 and Energy Star compliant
• Single-stage capacity control (sizes 04 to 07)
• Two-stage cooling capacity control (sizes 08 to 012)
• SEERs up to 15.6
• EERs up to 13.0
• IPLVs up to 13.0
• Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
• Gas efficiencies up to 82%
• Induced draft combustion
• Single and multi-state heating
• Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
• TXV refrigerant metering device on each circuit with removable power element
• Fully insulated cabinet
• Enhanced copper tube and aluminum fin designed condenser and evaporator coils. Special coated coils also available
• Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
• Dedicated 3-5 ton "Low NOx" models available that meet California Air Quality Management NOx requirement of 40 nangram/joule or ess. Low NOx models include stainless steel heat exchangers.
• Stanadrd cooling operating range up to 125 ¡F (52¡C) and down to 35¡F (-2¡C). Low ambient controllers can bring cooling operation down to -20¡F (-29¡C)
• Rated in accordance with ARI Standards 210/240 (sizes 04 to 06 ) and 340/360 (sizes 07 to 12)
• Designed in accordance with UnderwritersÕ Laboratories Standard 1995
• Listed by UL and UL, Canada

Ultra High Efficiency Single Package
Gas Heating/Electric Cooling Rooftop Units
with Puron® Refrigerant (R410A)
and Novation™ Heat Exchanger Technology
15 to 25 Nominal Tons

48PM units are single-package ultra high efficient electric cooling with gas heating rooftop units with Novation™ Heat Exchanger Technology condenser coils. These units provide ultra high operating efficiencies, ease of maintenance, installability, and reliability. Units come pre-wired and pre-charged with Puron® (R-410A) environmentally sound refrigerant at the factory. Units are fully factory tested.

• NOVATION Heat Exchanger Technology
• Puron (R-410A) HFC refrigerant
• EERs up to 12.0
• IEER up to 12.4
• Low sound levels as low as 92 dB
• Multi-stage capacity control on all models
• TXV refrigerant metering system on each circuit
• Cooling operation up to 125¡ F ambient
• Foil faced insulation encapsulated throughout entire unit minimizes airborne fibers from the air stream
• Dedicated compressor compartment for lower sound ratings and no air bypass
• Internally sloped condensate pan conforms to ASHRAE 62 standard
• High performance belt drive motor with variable pitch pulleys and quick adjust belt system
• 2-inch filter standard with 4-inch capabilities
• ComfortLink™ controls provide:
  • Cooling operation down to 0¡ F (-17¡ C) ambient
  • Compressor reverse rotation protection
  • Large visual display Ð scrolling marquee
  • 3V™ control system and CCN integration capabilities
• Gas efficiencies up to 82%
• Rated in accordance with ARI Standard 360 (16 -28 sizes)
• Tested in accordance with UL Standard 1995 and listed with UL and UL, Canada

Displacement Ventilation
or Single-Zone Variable Airflow
Single Package Rooftop Units
with Puron™ Refrigerant (R-410A)
4 and 5 Nominal Tons

48PD units are single-package ultra high efficient electric cooling with gas heating rooftop units with variable capacity and variable fan speed control. These units provide ultra high operating efficiencies, ease of maintenance, installability, and reliability. Units come pre-wired and pre-charged with Puron® (R-410A) environmentally sound refrigerant at the factory. Units are factory tested in both heating and cooling modes.

• Puron® (R-410A) HFC refrigerant
• SEER up to 15.2, EER up to 12.8
• ARI certified outdoor sound levels as low as 72 db
• ComfortLINK™ direct digital controls (DDC)
• Phase loss and compressor reverse rotation protection
• Evaporator fan motor system with high performance belt drives and variable speed motors from 20% to 100%
• Fully hermetic, digital scroll compressors with capacity modulation provide any capacity between 15% and 100%
• TXV refrigerant metering system on each circuit
• High pressure, low pressure/loss of charge, and freeze protection
• Solid core liquid line filter drier on each circuit
• Ambient cooling operation from 0¡F up to 125¡F
• Foil faced insulation throughout entire unit
• Pre-painted exterior panels and primer-coated interior panels tested to 500 hours ASTM B117 (scribed specimen) salt spray protection
• Rust-proof, internally sloped condensate pan conforms to ASHRAE 62 standard
• Internally protected, shaft down totally enclosed condenser motors
• 2 inch filter standard, field convertible to 4 inch capability
• 24 volt control system with resettable circuit breakers
• Induced draft combustion
• Redundant gas valves with up to two stages of heating
• Sizes 05-06 are ENERGY STAR qualified

Single-Package Rooftop
High-Efficiency
Gas Heating/Electric Cooling Units
With Puron® Refrigerant (R-410A)
20 to 60 Nominal Tons

48A2 - CV, Vertical
48A3 - VAV, Vertical
48A4 - CV, Horizontal
48A5 - VAV, Horizontal

Carrier "A" Ð Series Rooftop products are pre-wired and charged with refrigerant and tested in both cooling and heating modes at the factory.

All 48A models feature an industrial grade cabinet with fully hinged access panels. Superior supply fan performance with up to 3.5 in. external static pressure is standard.

They are available in dedicated vertical down shot and horizontal side supply/return airflow models. There are "A" Series models available for Constant Volume or Variable Air Volume applications. A wide variety of gas options are available.

All "A" Series units come standard with ComfortLinkª control and Scroll compressors on dual independent TXV controlled refrigeration circuits.

• High-efficiency scroll compressors
• TXV refrigerant metering device for each circuit
• Two-stage cooling on Constant Volume units, with multiple adaptive demand control for up to 5 stages of cooling capacity
• Cooling operation range up to 120¡ F ambient and down to 35¡ F ambient
• 115-volt and 24-volt control circuit
• Sloped, aluminized steel condensate pan
• Two-inch disposable-type return air filters (Optional four inch available)
• Fixed speed belt-drive blower drive
• High-efficiency motors meet EPACT (Alternate motors are available)
• Two-position outside air damper is standard, capable of admitting up to 25% outdoor air during fan operation, closed when the fan is off. Outside air hoods and permanent filters.
• Meet or exceed the EER requirements of ASHRAE Standard 90.1
• Rated in accordance with ARI Standard 340/360
• Tested in accordance with UL Standard 1995
• Listed by ETL and ETL, Canada
• Variable Air Volume Units:
  • Adjustable speed drive with true torque control (VFD)
  • Soft start and anti-windmilling control
  • Supply duct static pressure control
  • Discharge air temperature control
  • Supply air temperature reset
  • Up to 6 steps of cooling capacity staging available with optional hot gas bypass
• ComfortLink™ control:
  • Easy to use Scrolling Marquee Display
  • Time schedule
  • Space temperature sensor capability
  • Service diagnostics, alarms and alarm history
  • CO2 sensor capability for Demand Control Ventilation (DCV)
  • Compressor reverse rotation protection
  • Short-cycle compressor protection
  • Self-diagnostic service and start up run test capability
  • Carrier Comfort Network® communications or stand-alone operation
  • Remote start/stop capability
  • ComfortID™ system with 35 and 45 series PIC terminals

Single-Package High-Efficiency
Gas Heating/Electric Cooling Rooftop Units
with Puron¨ Refrigerant (R-410A)
30 to 100 Nominal Tons

48P2 Ð Vertical CV
48P3 Ð Vertical VAV
48P4 Ð Horizontal CV
48P5 Ð Horizontal VAV

Carrier P Series rooftop units are pre-wired and factory-tested in both cooling and heating modes. All 48P models feature an industrial grade cabinet with fully hinged access panels. Standard forward-curved supply fans provide superior supply fan performance of up to 4 in. external static pressure (ESP) while optional airfoil supply fans provide fan performance up to 6 in. ESP.

Units are available in dedicated vertical and horizontal supply/return airflow models for constant volume (CV) or variable air volume (VAV) applications. A wide variety of gas heating options are also available. Units come with the ComfortLinkª DDC (direct digital control) communicating control system and hermetic scroll compressors on dual independent thermostatic expansion valve (TXV) controlled refrigeration circuits.

• Puron® non-ozone depleting R-410A refrigerant
• Multiple high-efficiency scroll compressors include a crankcase heater and spring isolation
• Up to 8 steps of cooling capacity control
• Intertwined evaporator coils for full-face active operation at part-load conditions
• Dual sloped, stainless steel condensate pan
• Cooling operating range from 32 to 115 F ambient (down to -20 F with accessory Motormaster® V control)
• 115-volt and 24-volt control circuits
• 2-in. disposable return air filters
• Standard 2-in. filter tracks are field convertible to accept 4-in. filters
• Outside air hoods with permanent filters
• Single low speed supply fan
• 2-in. deflection isolation springs on supply fan sled
• Fixed speed belt-driven blower drive
• High-efficiency motors meet Energy Policy Act (EPACT)
• Induced draft gas heating system with the direct spark ignition (DSI) control system measures 81% annual fuel utilization efficiency (AFUE) using the integrated gas controller (IGC)
• Variable air volume units include:
  • Adjustable speed drive with true torque control
  • Soft start and anti-windmilling control
  • Supply duct static pressure control
  • Discharge air temperature control
  • Supply air temperature reset
• ComfortLink controls provide:
  • Easy to use scrolling marquee display
  • Time schedule
  • Space temperature sensor capability
  • Service diagnostics, alarms and alarm history
  • CO2 sensor capability for demand controlled ventilation (DCV)
  • Compressor reverse rotation protection
  • Short-cycle compressor protection
  • Self-diagnostic service and start-up run test capability
  • Carrier Comfort Network® (CCN) communications or stand-alone operation
  • Remote start/stop capability
• Rated in accordance with ARI Standard 340/360